Dedicated Coupling & Flange Adaptor
PIPEMATE‘s range of dedicated pipe joints offer the ultimate connection for plain ended pipes
or to flanged fittings, flanged pipes, valves with the same outside diameters.
Ideal for new lay pipes, repair, and maintenance seamlessly.
Dedicated Mechanical Coupling
Dedicated Flange Adaptor
Dedicated Mechanical Coupling
Features
Our Dedicated range Mechanical Coupling joins pipes of the same outside diameter and is suitable for an enormous range of pipework applications for any pipeline, above or below ground level.
Working within the following typical parameters:
Size Range: DN100 – DN3000 (larger diameters are available upon request)
Working Pressure: Up to 40 bar, according to size
Service Temperature Range: -20°C to 150°C (subject to gasket material used)
Location: Above or below ground subject to certain limitations according to pipe material.
Suitable For:
Water, sewerage, gas, oil, air, solid materials, etc. Subject to sealing gasket material used and pipe limitation.
Corrosion Protection:
The Dedicated range of products are coated standard with Fusion Bonded Epoxy (FBE).
Other coatings are available upon request.
Pipe Materials:
Steel, Ductile Iron, Cast Iron, Asbestos Cement, GRP, UPVC, and PE.
With use on PE pipes, pipe inserts are required.
Standard Specification
End Flange:
Rolled Steel section to BS EN 10025 S275JR
SG Ductile Iron to BS EN 1563 Grade 450-10 (DN150 & below)
Sleeve:
Rolled Steel section to BS EN 10025 S275JR
Bolts:
Steel to BS EN ISO 898-1 Grade 4.6
HDG to EN ISO 1461
Gaskets:
EPDM to BS EN 681-1 for water application
NBR to BS EN 681-1 for sewage application
(Other suitable gasket types to suit service are available upon request)
Technical Specification
Contact us and tell us what you need solutions for!
Dedicated Flange Adaptor
Features
Our Dedicated range Flange Adaptor connects plain ended pipes of specified outside diameter to valves, flanged pipes, or any flange fittings. It is suitable for an enormous range of pipework application for any pipeline, above or below ground level. Working within the following typical parameters:
Size Range: DN100 – DN3000 (larger diameters are available upon request)
Working Pressure: Up to 40 bar, according to size
Service Temperature Range: -20°C to 150°C (subject to gasket material used)
Location: Above or below ground subject to certain limitations according to pipe material.
Suitable For:
Water, sewerage, gas, oil, air, solid materials, etc. Subject to sealing gasket material used and pipe limitation.
Corrosion Protection:
The Dedicated range of products are coated standard with Fusion Bonded Epoxy (FBE).
Other coatings are available upon request.
Pipe Materials:
Steel, Ductile Iron, Cast Iron, Asbestos Cement, GRP, UPVC, and PE.
With use on PE pipes, pipe inserts are required.
Standard Specification
End Ring:
Rolled Steel section to BS EN 10025 S275JR
SG Ductile Iron to BS EN 1563 Grade 450-10 (DN150 & below)
Sleeve:
Rolled Steel section to BS EN 10025 S275JR
Flange:
Forged Steel to EN 10222-2 grade P245GH
Rolled Steel to BS EN 10025 S235JR/S275JR
Bolts:
Steel to BS EN ISO 898-1 Grade 4.6
HDG to EN ISO 1461
Gaskets:
EPDM to BS EN 681-1 for water application
NBR to BS EN 681-1 for sewage application
(Other suitable gasket types to suit service are available upon request)
Technical Specification
Contact us and tell us what you need solutions for!